svx

pffff

read more
On April 18, 2014, posted in: N/A by

Double flow dosing valve VDD

The operating principle of the VDD valve is based on a triple position actuator moving a conical plug. The first position enables the valve to be fully opened, thereby minimizing pressure drop. The second position allows intermediate opening for reduced product flow. A micrometric screw located on the top of the actuator enables the precise […]

read more

PED hygienic pressure safety valve SHP

SHP safety valves are available in ND 8, 13, 20, 32 and 40, supplied with micro-clamp, mini-clamp or clamp depending on diameter. This equipment it totally autonomous, requiring no external control for its operation. Pressure calibration is with a stainless steel spring and pressure blowoff is collected. Calibration must be between +0.5 bars and +6 […]

read more

Powder introduction valve under vacuum RT

The RT tank bottom valve is a check valve for the introduction of powders at tank bottom under vacuum. Its flush design guarantees the absence of retention zones (favourable to bacterial growth and the formation of moist powder “plugs”) at tank bottom. The RT powder introduction valve must be coupled to a rotor-stator to disperse […]

read more

Tank bottom valve RPF

The RFP tank bottom valve is a check valve for draining or adding a liquid to a tank. Its flush design guarantees the absence of retention zones (favourable to bacterial growth) at tank bottom. The RFP tank bottom valve is available in “sediment drain” version (the disc opens by descending in the valve body) or […]

read more

Tank levelling sample valve PEMS III

The PEMS iII sampling valve is used to take a liquid sample from a tank for quality and/or bacteriology controls. Its hygienic “flush membrane” hygienic design (flared body) guarantees the absence of retention zones (favourable to bacterial growth) with clear and/or relatively non-viscous liquids, as well as excellent cleanability. Its hygienic qualities and simplicity of […]

read more

Carbonator AED

The AED carbonator is used for in-line injection of a gas in a clear liquid, either batch or continuous. The extent of gas saturation of the liquid is determined by: – The flow-rate and temperature of the liquid – Gas pressure For a number of liquids, we have graphs for determining these values as a […]

read more

Full bore multiway valves MV

MV multiway valves are “all or nothing” valves equipped with a full flow cylindrical cock for the transfer of clear, viscous and/or charged products. Their hygienic design ensures the absence of retention zones at the same time as providing optimal cleanability by pulsing during CIP cycles. They are available in the following versions: 2 ways, […]

read more

CIP valve for viscous product tank with scrapers LPA

The LPA flush valve for washing reinforces cleaning by targeting “shadow zones” of mixers and shafts on tanks equipped with mixers, in particular those with anchors and scrapers. Attached to the shell of the tank, its flush design does not interfere with scrapers and does not damage them. Each LPA valve is custom designed: SERVINOX […]

read more

Pressure / Vacuum safety valve for wine inert tank BOGV

The BOGV safety valve is safety equipment destined to protect storage tanks under an inert atmosphere, in particular for wine making. Its standard design provides the best quality/cost ratio on the market for a stainless steel valve 1.4404 (316L), for both acquisition and maintenance costs. The BOGV safety valve is designed only to transport gases; […]

read more